تفلون کربن 25 درصد توسعه تفلون

PTFE+25%Carbon

Teflon PTFE mixed with 25% carbon (PTFE carbon or PTFE + 25% Carbon) is one of the fluorinated Teflon with 23% carbon and 2% graphite added to Virgin Teflon (PTFE) and has Relatively better features compared to Virgin Teflon (PTFE) and naturally available in black on the market.

Carbon significantly improves the erosion and metamorphic strength of the material and its chemical resistance remains relatively unchanged. However, the electrical properties of the material also increase significantly.

 Teflon carbon (PTFE + Carbon) is primarily used in cases where more thermal and electrical conductivity is required than Virgin Teflon PTFE.

It is also modified in durability and compressive strength to Virgin Teflon (PTFE), which makes it suitable for pressurized applications. Teflon carbon (PTFE + Carbon) has good resistance to creep, pressure tolerance, surface coating and abrasion in sliding or scratching applications in dry to lubricated conditions.

Teflon carbon (PTFE + Carbon) is the best type of reinforced Teflon for aquatic environments. It is also very suitable for dynamic applications at high speeds, because thermal conductivity reduces the accumulation of heat on the surface involved and therefore has a better lifespan than other Teflon in these conditions.

To view complete information about the properties and chemical resistance of this compound, click on the link.

Advantages

  • Better abrasion resistance than pure Teflon (PTFE) at high speeds
  • Relatively higher thermal resistance when pressed
  • Higher tensile and flexural strength
  • Significant thermal stability in the range of -265 to +260 degrees Celsius
  • Has the lowest known amount of surface friction
  • Excellent non-stick properties

Disadvantages

  • Decreased acid and base resistance in some solvents
  • Problem processability even at very high temperatures
  • Very high specific gravity

Application

  • Types of bearings
  • Ring Rider
  • Piston ring
  • Compressor ring
  • Bush
  • Pressure washers

Teflon PTFE mixed with 25% carbon is produced and supplied in the form of SHEETS, RODS and TUBES in different dimensions and sizes.

DATASHEET

Related Posts

No results found.

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.

Menu