ورق، میلگرد و لوله PTFE توسعه تفلون

PTFE

Polytetrafluoroethylene (PTFE) is a molecular weight fluoropolymer based on Tetrafluoroethylene (TFE) developed by Du Pont de Nemours in 1938. Polytetrafluoroethylene (PTFE) was discovered during investigations on coolants. The powder could not be detected in acid, solvent or base and does not flow at melting temperatures.

پلی آمید توسعه تفلون

PA

The following PA types are available in sheets and fittings:

Polyamide 6
Polyamid cast
Powdered ammonium bridge
Polyamide 6.6
Polyamide mixed with glass 30%

پلی استال توسعه تفلون

POM

Polyester POM has high strength and high strength with improved dimensional stability and easy machining. Polyester POM, as a semi-crystalline material, is also characterized by a low friction coefficient and good abrasive properties, especially in wet environments.

UHMW1000 sheet Toseteflon

UHMW1000

Polyethylene UHMW1000 has a standard for engineering polymers with a unique combination of wear and corrosion resistance, low friction and impact strength.

Polyethylene UHMW1000 is resistant to chemical penetration and absorption of moisture, and its key physical properties are maintained at -30 ° C.

ورق و میلگرد پلی اورتان

PUR

Polyurethane PUR was developed in Germany during the Second World War. Its main application is in coatings, elastomers and foams. The elastomer has a high abrasion resistance. Polyurethane foam rigid due to the combination of low heat transfer and cost effectiveness are widely used as insulation materials.

پیک توسعه تفلون

PEEK

Excellent mechanical performance makes parts with a lower weight, durability and more power. Therefore PEEK Courier is an alternative solution for metals in extreme conditions. The PEEK courier's thermal performance, as well as the abrasion and chemical resistance, ensures longer life and integrity of the components in hard environments.

پودر میکرو PTFE توسعه تفلون

PTFE Micro Powder

Polytetrafluoroethylene (PTFE) is composed of tetrafluoroethylene polymerization (TFE). The fundamental properties of PTFE PTFE are due to the very strong chemical bond between carbon atoms and fluorine.

واشر توسعه تفلون

Finished Products

PTFE Teflon gaskets with low and non-contaminated chemical resistance (approved by the FDA) for use in food.

PTFE Teflon (PTFE) is not recommended for liquid and fluorocarbon.